HEALTH
MONITORING AND ALERTING SYSTEM USING
GSM AND IOT TECHNOLOGY
ABSTRACT:
The project intends to interface the Raspberry
Pi 3 with the sensors and sends the information of health conditions of the
patient to the doctor and to the web server as well. The project uses the
Embedded Systems to design this application. The main objective of this project
is to design a system that continuously monitors the health parameters of the
patient and if any one of the values is likely to exceed the normal values, the
system immediately sends the status to the doctor’s mobile.
This project is a device that collects data
from the sensors, codes the data into a format that can be understood by the
controlling section. The Raspberry Pi board will collect the sensors digital
data from the ADC output. The ADC is used to convert the sensors’ analog date
into equivalent digital values.
This project describes,
to monitor the ECG values, Body temperature, blood pressure are measured and given
to Raspberry Pi 2 board. For every sensor output, we set a threshold value. If
any of these sensor values cross that threshold limit, then the buzzer will
blow and the alert message will send to the doctor and to the relatives using
the GSM module. Besides that for every specific time period, those parameters
are sent to the thingspeak web server. Wi-Fimodule is used to send the sensors data to the user webpage. Up-to-date information
was shown on webpage so that from worldwide we can monitor the patient
parameters.
